Workers are mixing yellow rubber for molding large mat.

We new invested 110 liters dispersion mixer, the maximum mixing is about 200 kg, the capacity is large, the mixing effect is good, with a hoist.
The rubber from the hopper can be automatically transported to the open mixer through the hoist, which increases the efficiency and reduces labor intensity.
From last year to now, we new invested 10 sets of vacuum vulcanizing machines because of the explosion of rubber molded bumper plates.
This has greatly improved production efficiency, shortened delivery time.

This year is the Chinese NewYear of the Ox, a lucky year, hope we are all healthy, safe and happy.

From 10th to 17th Feburary we are on Chinese New Year holiday.

Our worker colleagues has on holiday, will come back on 19th-27th Feburary.

Happy New Year!

Are you sourcing big sizes of silicone profiles?

We can product kinds of big sizes silicone extruded profile.

Material: Silicone, FDA silicone


We would like to share with you FDA silicone stopper we are producing now.

If any need of FDA silicone parts, please feel free to contact us.

Gald to share with you that our EPDM rubber profile passed the R118 test!

Passed P01 according to R118 regulation Annex 6-SGS Test Report No. AJFS2007005793RS

Passed P03 according to R118 regulation Annex 8-SGS Test Report No. AJFS2007005794RS

Our QA Dora Du is explaining to the workers the requirements for the trimming and quality of rubber parts in the picture.
If the workers do not understand, she will explain to the workers in detail until all the workers responsible for this product clearly understand the requirements.
We are proud of their actively responsible for every product issue.Thank you all!

Customer feedback: 
We have received the first thousand meters and we have sampled out to all our regular clients to test on their various products. The feedback has been very good.
The finish is very good – please thank your team for a great job.
There’s only one minor adjustment we would like. The total width of the profile should be close to 8mm, but the sample order measures approx. 8.50mm (see attached picture).
Can you please confirm if you can adjust the width measurement down to 8mm?
Actually: According to ISO3302-1 E2 tolerance, 8+/-0.7mm, the width is no problem, and the dimension can not adjust from large to small.
But after communicating with customer we found that the problem is ” They have tried using on their product but is very loose fit so comes off very easy compared to old supply.”
The problem is the product is very easy comes off, as this product normally used on steel plate, so we confirm with customer the thickness of steel plate.
Because I think if it is comes off very easily, it may be inner range/width is a bit large.
We got that the edge thickness is 1.2mm. But customer drawing show the clamp range is 1-2.5mm, so the clamp range we do maybe a little bit large. We can adjust it to fit 1.2mm edge.
Finally, the problem solved, customer also happy to order 10000 meters.
So when meet problems, we need to communicate more with customers to find the real problem and solve it.

Some customers asked me what the cavity of the tooling means?

Do you want to know? Please see the picture below.

This tooling has 16 cavities, it can produce 16 pcs product at a time.